INSTALLATION OF RAD-HEAT GAS HEATING ELEMENTS
Name of Client*
Address
City
Phone (with ISD & STD Code) *
Email*
Project
SYSTEM RUNNING ON	ELECTRIC - HEATERS	HOT AIR - GENERATOR		THERMIC FLUID
DATA REQUIRED :
1.  Load of Electrical Heater (Kw)
2.  System Desired Max. Temp. (oC)
3.  Temp. Variation Allowed
4.  Circulation Fan Details :
HP of Motor
RPM of Motor
Cubic Flow Meter (nm3/hr)
5.  Batch Type Oven :
Weight of the Charge / Batch (Kg)
6.  Conveyorised Oven :
Speed of the Conveyor (m/min )
Max weight of the Component (Kg)
Pitch of the Component (mm)
Weight of the Conveyor (Kg/m)
7. Inlet Temp. of Fresh Air-Entering the Oven (oC)
8.  Outlet Temp. of Fresh Air-Leaving the Oven (oC)
9.  Burner's Details :
Fuel Used
Firing Rate ( ltrs/hr )
Connected Load [Power] (Kw)
10. Thermic Fluid Flow Rate (ltrs/min)
11. Inlet Temp. of Thermic Fluid - Entering the Oven (oC)
12. Outlet Temp. of Thermic Fluid - Leaving the Oven (oC)
13. System's / Oven's Effective / Working Dimensions (mm) :-
Length
Width
Height
14. Insulation Details :
Material used
Thickness (mm)
15. Sealing Details
16. Time Required to Raise the Temp.
{From Cold to the Desired Oven Temp.}(Hrs)
17. Water / Liquid Heating
Qty. of Water / Liquid to be heated (ltrs)
Tank Capacity(Size: L X W X H ) mm
Time required to raise the temp.(hrs)
> Cost of Electricity	> Cost of LPG / NG		System WorKing Hrs
>Rs Paise	> Rs /Kg,/m3